Product has been added to the cart.

Bias Binder 6mm

$ 42.84

Category:
DescriptionMachine Compatibility: 1, 2, 3, 4, 5, 6, 7, 8, 9 Not sure which group your machine belongs to? Check out the Machine Compatibility Chart Binding with this Bias Binder foot is a breeze! You can use pre-packaged bias tape or you can make your own to use. How to use: To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm) wide bias strip of lightweight fabric, or use packaged narrow double fold Bias Binding. Straight stitch, length 2.5, or zigzag or decorative stitch at the desired length. Snap on Bias Binder. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot and pull it down under the foot. Place the edge to be bound into the groove on the left side of the funnel guide. Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen the screw on the top of the foot, and position the funnel guide as needed.

How it works

Follow these simple steps to set up the RAZ Medical ID Bracelet:   

  1. Go to MyTapMedID.com. 
  2. Click the “First Time Activation” button. 
  3. Fill in the wearer’s personal information. 
  4. Enter the ID and PIN printed on your RAZ Medical ID Bracelet. 
  5. Click “Activate” to create your account. 

Once activated, you’ll be able to enter the wearer’s medical information.  After this is completed, the bracelet is ready to be used!   

Specifications

Dimensions: 5.12 x 2.09 x 1.18 inches
Weight: 1.13 ounces
Material: Silicone
Gender: Unisex
Size: Maximum wrist size of 8 inches in diameter
Color: Navy blue

 

FAQ

Click here to access our FAQ. If your question is not answered, please contact us. 

Return Policy

Please find our Return Policy at https://nonviableliving.co.uk/legal/#return

You may also need...

Close
View Cart